Force One EVL-16M Vertical Lathes & Boring Mill

The structural parts, such as the base, table, columns and cross rail are all manufactured from high quality Meehanite cast iron, fully stress relieved before surface hardening and precision machining takes place.

The slideways of the column beam and saddle are all hardened by high frequency induction before they are precision ground. The column had twin vertical slideways on either side for further enhanced rigidity during heavy duty machining.

The two cross rail saddles and the ram saddle are lined with Turcite B for smooth movement and wear resistance.

Both axes are positioned by means of AC digital servo motors mounted directly to the end of large diameter pre-tensioned ballscrews. Standard feedback comes from pulse coders mounted inside the servo motors, but the machine can be supplied with linear scales for even greater accuracy.

The slideways on the cross beam are enhanced with alloy steel to further increase their wear resistance. The unclamping and elevation of the cross beam is achieved hydraulically, whereas the clamping is done by mechanical springs and shotbolt when the limit switches on either side are touched.

All slideways and ballscrews are lubricated by means of an automatic oil distributor, controlled by variable timer settings inside the Fanuc control. The spindle bearings and gear box are lubricated by circulating refrigerated oil.

The standard work table or chuck has four independent manually adjusted jaws.

The table is carried by means of heavy duty Japanese roller thrust bearings.

High torque or high speed is achieved by means of a very robust built-in two stage gear box.

This turning centre ram is fitted with a machining centre type spindle drive mechanism and ISO-50 spindle nose to receive the BT-50 type of tool holders. The clamping force is provided by a large column of disc springs to hold the tools even when the machine has been shut down, and unclamping is performed hydraulically. With this type of ram, both static turning tools and rotating tools can be utilized, in conjunction with the 'C' axis positioning of the table.

The tool selection is bi-directional for greatest efficiency and driven by AC servo motor for fast and accurate positioning and repeatability. Tool are exchanged by means of magazine indexing, axis positioning and a hydraulic clamping mechanism within the ram. The tool magazine has a separate guard with automatic door to prevent swarf and coolant entering this compartment during machining.

The working environment is fully enclosed except for the roof, and two large doors provide the operator with a very generous loading aperture. All doors are interlocked for complete operator safety.

The machine is enhanced with renowned Fanuc control and digital drive systems. All functions are accessible at an ergonomically designed operators panel complete with an 8.4 inch colour liquid crystal display. A mobile handwheel ( manual pulse generator ), for easy setup inside the machine, is also standard equipment.

One Turning and Facing Tool Holder, One 80 mm Boring bar Holder and 3 VDI tool holders with detachable bases.

The machine warranty covers the cost of any parts and labour required within a 12 month period from the actual date of delivery.

The Fanuc warranty covers the cost of any Fanuc parts and labour required within a 24 month period from the actual date of delivery.

The CE certificate verifies that all electrical and mechanical components used in the construction of this machine are fully compliant for importation in to the European Community. This also includes an ENC-225A radio emissions filtering device.

The item has the following options :