Kent KMV-42P Gantry & Double Column Machining Center
Offer Details
Product Description
The machine base, columns, cross beam, work table, slide ways, head and all cast parts are of top grade Meehanite Cast Iron. All components are subjected to annealing, which dispels any internal stress and prevents deformation.
The Z axis is built with tough cast iron box construction designed for heavy loads and analyzed for internal stress, and also reinforced with rugged internal rib supports.
Ultra wide ladder type cross beam with dual LM linear guide ways ensures rigidity of the spindle and wards off tilting.
Every machine undergoes parameter laser testing and fine tuning before shipment. Each comes with its own certificate of laser testing.
The control panel positioning is adjustable so that operators get the most advantageous viewpoint throughout various stages of processing.
The standard CNC control is the Fanuc Oi-MD ( Package A ) with 8.4" LCD colour monitor.
Product Features
The Machine Frame
The machine base, column, cross beam, work table, headstock and all cast parts are made of top quality meehanite cast iron. All component parts are annealled to remove any internal stress thus preventing any deformation after machining. Finite analysis is used to achieve the optimum rigidity and durability.
The Slide Ways
Both X and Y axes are equipped with high precision heavy duty LM guide ways. The Z axis has robust square box type slideways for even greater rigidity.
The Nitro Counter Balance System
The Z axis carrying the headstock, is counter balanced with dual pneumatic cylinders charged with Nitrogen, for automatic cushioning during vertical motion.
The Ball Screws
All three axes have pretensioned super precision hollow core ball screws with circulating temperature controlled coolant.
The Spindle Cartridge
The standard integrated direct drive spindle employs two pairs of ultra-precision taper roller bearings with an oil chiller cooling system. Long nose spindles are available as per customer requirements.
The Oil Refrigeration System
The oil chiller circulates temperature controlled coolant oil through all three ball screws and the ZF gear box to eliminate any inaccuracy caused by thermal displacement.
Standard Accessories
ZF Dual Stage Automatic Gear Box
The multi-speed spindle is matched with top quality German-built Z.F. dual stage gear box. The gear box is fully sealed and lubricated with circulating oil from the temperature controlled oil chiller.
Spindle Air Blast
Heat Exchanger for the Electrical Cabinet
RS-232 Serial Interface
Work Lamp
Flood Coolant System
Chip Conveyors
Dual screw chain driven chip conveyers eliminate debris efficiently from the machine and the chain type lift-up conveyor deposits the waste material into the swarf bin.
Hand Tools with a Tool Box
Machine Operator and Maintenance Manuals
Fanuc Programming and Operator Manual
Fully Enclosed Splash Guard
Mobile Manual Pulse Generator ( Hand Wheel )
Rigid Tapping
Machine Status Indicator Beacon
Three Phase Transformer
Machine Levelling Screws and Pads
Optional Accessories
Fanuc 18i-MB with 10.4" LCD Colour Monitor
BT-40 Spindle
A BT-40 tooling system is not standard but can be supplied if prefered with any of the optional accessories listed below.
The disc type tool magazine is fast and compact. Arm movement is smooth with excellent repeatability. The tool change time is only 2.5 seconds for the BT40 tooling system.
The item has the following options :
10000 rpm SpindleTwin Arm ATC with 24 Station Tool Magazine
Twin Arm ATC with 32 Station Tool Magazine
BT-50 Spindle
The standard tooling system is BT-50 which can be supplied with the following optional accessories :-
The item has the following options :
Twin Arm ATC with 24 Station Tool MagazineTwin Arm ATC with 32 Station Tool Magazine
6000 rpm Spindle
8000 rpm Spindle
Through the Spindle Coolant System ( 6 bar )
400 Litre High Pressure Through the Spindle Coolant System
The extra 400 litre coolant tank is supplied with a paper filtration system and 80 litres / min. pumping capacity. The pressure of the coolant through the spindle is 20 bar.
600 Litre High Pressure Through the Spindle Coolant System
The extra 600 litre coolant tank is supplied with a duplex filtration system ( 25 microns smallest particle ) and an 80 litres / min. pumping capacity. The pressure of the coolant through the spindle is 20 bar.