PROKING SA-50 Oil Field & Hollow Spindle Lathe

The one piece Meehanite cast iron bed fills most of the length and height of the machine to provide maximum rigidity and stability.

The bed of the machine is designed for maximum stability under extreme conditions, with the ability to absorb cutting forces and dampen vibration.

Three massive rectangular shaped slideways are an integral part of the main bed casting and not bolt-on accessories. After stress relieving the slideways are induction hardened to a minimum of HS70 or HB480 and precision ground.

The slideways are cast at a 60 degree slope to ensure swift swarf evacuation from the cutting environment.

The single box type casting provides the rigidity required to absorb the extreme cutting forces generated by high metal removal rates.

The hardened and ground spindle is manufactured from high quality alloy steel, and is carried on a double row of high precision Timken taper roller bearings to resist radial and axial loads during heavy cutting operations. Only Timken world renowned bearings are used in the headstock.

The headstock gearing is manufactured from EN 36 BS970-655 M13 material which has been heat treated and precision ground.

The four speed ranges are selectable by means of control 'M' functions or operator panel switch. Within each speed range the speed is completely variable by means of control 'S' function or operator panel twist knob.

The headstock gearing, spindle and auxiliary bearings are all lubricated by the automatic circulating refrigeration system.

Hollow spindle machines can be supplied with an extra chuck at the rear of the spindle to provide increased stability when supporting long workpieces.

The underside of both saddles are lined with Turcite B an extremely durable anti-friction material to ensure ease of movement and minimum wear over many years of production. High precision ballscrews from class 3C are utilized with pre-loaded nuts on both axes for backlash free transmission. The ballscrews are also pre-tensioned to compensate for any thermal expansion as the machine warms up with use.

Linear scales provide actual position feedback rather than assumed feedback from rotary pulse coders.

The ballscrews and slideways are protected by high quality stainless steel telescopic covers to prevent contamination with metal chips and coolant.

The Baraffaldi TB400 electromechanical turret is indexed by means of a brush-less servomotor and shock-less positioning mechanism. This heavy duty turret employs a conical clutch for high accuracy positioning and will always take the shortest path to the next tool selection. The turret is extremely efficient yet robust and practically maintenance free, complete with coolant ducts to carry pressurized coolant to the active tool station.

MAIN CHARACTERISTICS

Turret controlled by servomotor
Turret release without lifting the faceplate
Minimum indexing times
Bidirectional rotation
Life lubrication of the mechanical components
A spring system ensures the clamping of the turret in the absence of electrical power
Large dimension Hirth-toothed crowns
Two dynamic seals on the rotating disc
Easy access to all electrical components
300 mm deep tool holding disk

The very substantial tailstock body is made of Meehanite cast iron and the honed bore houses a stainless sleel precision ground quill. The quill is heat treated and hardened to at least HRC45. A rotating centre mounted inside precision bearings is an integral part of the tailstock quill. To further enhance the rigidity and accuracy, the quill is fitted with a large Morse tapered centre. Both the tailstock body and the quill are operated by means of 'M' function command or control panel switch.

The full guard enclosure is fitted with two large sliding doors for easy access to the workpiece and cutting tools. The doors are fully interlocked to protect the operator during production runs, and spindle and axis movements are restricted when the doors are open. All guarding panels are specifically designed to aid the flow of swarf and coolant into the conveyor. The operators control panel is ergonomically designed to be carried on the right hand door of the machine and swivel as desired by the operator.

The very popular Fanuc 18iT-B control is suplied with a full key operators panel, 10.4" liquid crystal display and back edit function. The control and machine interface is PCB manufactured.

This cabinet houses the latest Fanuc Alpha AC digital system and the electrical interface components which are either of Japanese or European origin and designed to comply full with current CE regulations.

The headstock is fitted with an independant 18,000 BTU oil cooling system to maintain normal operating temperatures at high speeds, at the same time as lubricating all moving parts of the spindle and gearbox.

A refrigeration system is mounted at the side of the electrical interface cabinet to maintain the cool temperature of air within the cabinet.

The automatic lubrication system forces a regulated flow of oil to all sliding saddles and ballscrews. Both the time of flow and the interval are regulated by means of PLC timers.

The three phase transformer converts the customers supply voltage to what is required by the Fanuc control and machine interface.

The heavy duty chip conveyor sits directly on a very large capacity coolant tank. The conveyor and coolant tank extend under the full length of the cutting environment. The lift-up end of the conveyor and the coolant tank are mounted on castor wheels for easy extraction to facilitate cleaning. A mobile swarf bin / chip container is also provided.

The Baruffaldi TBMA320 Turret is installed within the SB-50 when the machine is not only used for turning, but also milling, drilling and tapping. This special turret is used in conjunction with the additional C axis spindle positioning function. VDI holders can also be supplied so that all these functions can be performed at irregular angles. Every tool station can receive either a rotating or a fixed tool holder. The backlash free, multi-teeth Hirth clutch automatically engages with the tool for heavy machining.

Model IN-D-S800+SIN-S200 which is a closed centre 3-jaw hydraulic chuck and cylinder.

The Strong range of chucks and cylinders are manufactured in Taiwan. This offer includes a closed centre 3-jaw hydraulic chuck and cylinder.