Takang TNC660A x 3000 CNC Lathes & Turning Center
The bed of the machine consists of a one piece Meehanite FC-30 casting, heat treated to relieve inherent stresses and hardened to HS-700.
Slideways and Propulsion System
The slideways are precision ground and automatically lubricated and high precision auto lubricated ballscrews are employed on the X an Z axes.
The standard headstock has a manual four stage gearbox with oil bath lubrication and 20 hp Yaskawa spindle inverter. The heavy duty spindle has a three point bearing support system which is also bathed in headstock oil. This standard spindle has an 104 mm bore and a D1-11 or A1-11 spindle nose.
The standard tailstock is manually operated.
Standard Control and Drive System
The standard control is the Fagor 8055 with 11 inch liquid crystal display, full keypad and AC digital drive system.
Ergonomically Designed Control Panel
Standard White Paint Work
Twin Manual Pulse Generators
RS232 Serial Interface
Coolant Pump with Collection Tank and Filter
Automatic Lubrication System
Four Position Manual Tool Post
Full Splash Guard with Two Doors
Tool Box and Tools
Manual Three Jaw Chucks
Manual Four Jaw Chucks
Spindle Face Plates
Three Jaw Hydraulic Chucking Systems
Roller Type Steady Rest ( 70 - 370 mm )
Rear Tool post
Two Way Quick Change Toolpost & Six Holders
Hydraulic Tailstock with 120 mm Rotating Quill
Tailstock Rotating Centre ( MT-6 )
Enhanced Cross Slide Length ( from 1060 to 1260 mm )
Four Station Horizontal Electric Turret ( 32 x 32 mm )
Eight Station Hydraulic Drum Type Turret
8 sets of tool clamping blocks and wedges for 25 x 25 mm tooling
2 x boring bar and drill holders
6 x boring bar and drill sleeves ( 10, 12, 16, 20, 25, 32, mm )